BlueGold® Oli-Sil (OMRI Listed)

OMRI LISTED IRON SILCA MAGNESIUM –
DERIVED FROM: OLIVINE

WHAT CAN PROPER SILICA LEVELS DO FOR YOU?

Silica (Si), or as it is referred to on some labels as Silicon or Silica Dioxide, is a soil element that is associated with plant cellular structure, electrical exchanges, and nutrient-to-nutrient ionic bonding. It has also been associated with correcting Hollow Stem Syndrome and decreasing Aluminum and Chlorides. It is the most abundant element in soil, and yet it is referred to by plant biologists as a “non-essential beneficial plant nutrient.” This is equivalent to the mentality of recognizing there are over 90 periodic elements essential to “perfect” growth and yet stating you can grow “perfectly” with just only 3 of them (NPK) until the end of time. This incorrect mentality that has led to the lowest vitamin and mineral content in crops in the history of mankind is the same that led us to build the BlueGold® System of products to grow plants at maximum potential through the power of proper nutrition.

ABOUT BLUEGOLD® OLI-SIL

BlueGold® Oli-Sil is an extreme form of our BlueGold® Super Mag in terms of micronization. BlueGold® Oli-Sil is for foliar use to see immediate uptake via Apical’s Plant Sap PPM Test. BlueGold® Super Mag is the super-concentrated version of BlueGold® Oli-Sil for fertigation.

Our BlueGOLD® Oli-Sil is an Iron-Magnesium-Silica source and undergoes our trade-secret Eden Synergy process. This micronization process maximizes immediate bioavailability potential and combines the micronized Olivine rock with our flagship BlueGOLD® technology. BlueGOLD® Oli-Sil is formulated from Olivine rock, a unique Silica source with inherent Iron and Magnesium sources. The BlueGold® Oli-Sil ingredients are micronized via cold mechanical processes and have been proven to have a negative charge. For use in plant tissue and hydroponics to address deficiency issues.

APPLICATION RECOMMENDATION

For best results, this product must be used in conjunction with a proper Soil and Sap Test Analysis and applied according to test results for the crop type, crop height, and PPM change required. Properly balancing nutrients by simultaneously lowering all excess and raising all deficient nutrient PPMs is critical to long-lasting beneficial results in any crop.

Depending on the Silica PPM change needed, possible rates are as follows: If by foliar, 1 to 45 fl. oz. per acre with a minimum of 21 gallons of water. A non-guaranteed general use recommendation of this product in foliar applications per acre basis is 1oz per one foot of crop height for a desired plant sap movement of 1 PPM. If by fertigation injection, 1 to 9 fl. oz. per acre. If by aerial, 32 to 45 fl. oz. per 5 gallons of water used per acre. If by pivot or wheel line, apply at 100% ground speed, then resume normal ground speed watering. It can be applied in all weather conditions, including rain and extreme heat. The best spray time is early morning when dew is present. Rates subject to excesses, i.e., salts, chlorides, metals, sulfur, etc.

CAUTION: BLUEGOLD® OLI-SIL MAGNIFIES WHAT IT COMES INTO CONTACT WITH.

BlueGold® Oli-Sil is an OMRI-listed Input (please contact your certifier before use). Rates depend on the PPM change needed. We recommend Apical Crop Science Soil and Sap testing. 

Do not use with synthetically enhanced or grow media with excesses of Na Sodium, Chlorides, Aluminum, Sulfur, Magnesium, Potassium, NO3/NH4, Iron, and Boron with BlueGold®. We strongly recommend avoiding ocean-based products high in Na Sodium, Chlorides, and other salts with our Solutions and Sulfur-based products, salt, and heavy metal humus, manures (primarily commercial), and composts (especially mushroom, dead animal, etc.), etc. These inputs are upside down with excesses. The BlueGold® Grow System is based on balanced Nutritionals. By itself, BlueGold®, at recommended rates using Apical Testing, will not harm ANY crop, plant, biology, system, human, animal, environment, pollinator, or beneficial (including birds, butterflies, earthworms, etc.). Do NOT combine with pesticides/chemicals/plant cleaners/etc. Very recent or current use of chemicals like fertilizers, herbicides, fungicides, algaecides, bactericides, miticides, pesticides, biocides, fumigants, plant growth regulators, pH Up/Down chemicals, dyes, etc., – all can cause an unfavorable interaction due to the Wetting Agent properties of BlueGold® Solutions, which can magnify the strength of said chemical. Strengthened doses of those chemicals can result in direct stress, burning, or death of plants. BlueGold® Solutions by themselves, at recommended rates, without chemical interactions, will never cause these issues in any plant or soil (when used as directed). Users must respect BlueGold® labels and manufacturer warnings to not combine with chemical/synthetic/excess element inputs by +/- 90%. It is the user’s choice against our directions/recommendations. If you encounter problems in the plants from the previously mentioned by your choice, STOP. If you quickly move the pH to 6.4 with the help of pH adjusters, without adjusting inputs, you’re drastically making inputs more available, which results in stressed, burned, or dead plants from too big of a hit from the nutrients that are now available at a much higher % than previously. This is especially true when all the chemical/synthetic/excesses stored up flood the plants at even higher EC/PPM values. Likewise, if you do not adjust inputs while using BlueGold®, as soil/sap pH is driven to 6.4, the same can happen over an extended period depending on soil and watering conditions. Store in a cool place.

As the manufacturer, we offer a 100% Guarantee when used as directed, within the Eden Guaranteed Grow Program. A limited guarantee restricted to exclusive use with BlueGold® products and systems subject to the Apical soil, sap, water testing conditions, and Postal damages. No warranty or fitment of purpose promised.